Relay Camera Couplers work in tandem with the Case Relay Camera Power System to keep your camera powered continually with an external 5V USB battery pack or wall power. The Relay Coupler is simply an insert for your camera battery cavity that enables powering the camera via Case Relay Camera Power System. The coupler does not contain a battery or hold a charge.

Coupler : FujiFilm Battery NP-W235 (CRFW235)


ESSENTIALS

SKU: TT10369 Category:

Description

Infinite Power for Your Camera

The Relay Camera Coupler combined with the Case Relay Camera Power System provides constant, uninterruptable power for your camera and is perfect for time-lapse photography, photo booths, video production and power-hungry LiveView shooting or any long day on the set. Need more power? Hot swap in another power bank and continue shooting while never losing power to your camera.

How Does it Work?

Simply insert the Relay Camera Coupler directly into the camera battery port, attach it to the Case Relay CPS and power your camera with the included Rock Solid External Battery Pack or an AC power source using an USB to AC wall adapter or use the ONsite D-Tap Battery with V-Mount. Because Case Relay also has its own secondary internal 1200 mAh battery, if your external battery runs low you can easily hot swap the external battery and not lose power to the camera.

  • Insert Relay Camera Coupler into camera battery cavity
  • Completely close battery door allowing coupler cable to exit through the rubber trapdoor
  • Battery door must be completely closed for the Case Relay Camera Power System to properly function

Relay Camera Coupler & Relay CPS Benefits:

  • More cost effective than purchasing multiple proprietary camera batteries
  • Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
  • Never need to charge camera batteries again. And never run out power.
  • Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
  • A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.

 

Suggested Uses:

  • Pair the Relay Camera Coupler with the Case Relay Camera Power System to provide constant, uninterruptable power for your camera

 

Product Specifications:

  • Relay Coupler is simply an insert for your camera battery cavity that enables powering the camera via Case Relay Camera Power System. The coupler does not contain a battery or hold a charge.
  • Coupler cable is 10″ (25.4cm) – Coupler cable with Relay cable is 50″ (127cm)

 

Find Your Case Relay Camera Coupler

Case Relay Camera Couplers from Tether Tools work in tandem with the Case Relay Camera Power System (CPS) to keep your camera powered continually with an external 5V USB battery pack or wall power.

 

Relay Camera Coupler Compatible Manufacturer Battery
CRC400 Canon Battery BP-511A
CRCE5 Canon Battery LP-E5
CRCE6 Canon Battery LP-E6
CRCE8 Canon Battery LP-E8
CRCE10 Canon Battery LP-E10
CRCE15 Canon Battery LP-E12
CRCE18 Canon Battery LP-E17
CRW126 Fuji Battery NP-W126
CRN5 Nikon Battery EN-EL9a
CRN5A Nikon Battery EN-EL14A
CRN5B Nikon Battery EN-EL15
CRND4 Cable CRND4 compatible with Nikon EN-EL18
CRN5C Nikon Battery EN-EL24
CRBLN-1 Olympus Battery BLN-1
CRBLH-1 Olympus Battery BLH-1
CRPBLE9 Panasonic Battery DMW-BLG10
CRPBLC12 Panasonic Lumix Battery DMW-BLC12
CRPBLF19 Panasonic Battery DMW-BLF19
CRSFW50 Sony Battery NP-FW50
CRNPFZ100 Sony Battery NP-FZ100
CRCNPF Sony NP-F L Series Devices
CRL200 CRL200 for Sony CCD/DCR/DSC/HDR/PXW

Reviews

There are no reviews yet.

Be the first to review “Relay Camera Coupler for Fuji XT-4 (Special Order)”

Your email address will not be published. Required fields are marked *